Leia Organa: Slave outfit

Modérateur : Modérateur Fleur de Lys

Avatar de l’utilisateur
KnoXxVille
Membre RLFB
Membre RLFB
Messages : 1951
kuchnia na wymiar wrocław
Inscription : ven. 31 août 2012, 18:26

Leia Organa: Slave outfit

Message par KnoXxVille »

Ce sujet fait la liste des objets requis afin d'obtenir la validation auprès de la Rebel Legion d'un costume de Leia Organa: Slave outfit.

Standards au 29/09/2015
Liste également disponible ici: http://rebellegion.com/leia-organa-slave-outfit/

Image

Version Française:
Eléments obligatoires:
  • A venir
Eléments optionnels:
  • A venir
 

Version originale:
Required items :
  1. Bra
    1. The bra is a burnished Gold/Copper/Brass Metallic Bikini top with a humped curvature on the side of each bra “cup” with another similar shaped curvature inside of the bra cups.
    2. The bra has an underpiece below the bra cups with two “arms” extending from the sides.
    3. The bra has thin black or brown leather or elastic cording straps that criss-crosses in the back and attaches at the top of the bra cups and sides of the bra's underpiece. The straps have two burnished golden/copper/brass metallic tear-drop shapes on them in the front of the bikini.
    4. The bra cups are lined with suede fabric in the following approvable colors: olive green, medium gray, or dark taupe.
  2. Bikini Bottom
    1. The bikini bottom is made up of two burnished gold/copper/brass metallic plates, one in the front area below the belly button, and one in the back that covers the buttocks.
    2. The plates are slightly semi-circle shaped and slightly narrow towards the bottom.
    3. The plates have two orb shapes on each side and two curved designs below the orb shapes. The designs are surrounded by many decorative bumps and ridges.
    4. The plates are connected by black or brown elastic or leather strips connected to burnished gold/copper/brass metallic oval shaped loops on each side of the hips.
    5. The belly button should be exposed.
  3. Skirts
    1. There are two gathered skirt panels, one connected to each plate.
    2. The skirts should be in the following approvable colors: burgundy, wine, berry purple.
    3. The skirts are an opaque, non-shiny smooth fabric that reaches down to the ankles. No crushed velvet.
  4. Armband
    1. A burnished gold/copper/brass metallic coiled snake shaped armband is worn on the upper left arm.
    2. The armband’s snake coils are connected and not loose.
    3. The armband should have small detailed bumps for accuracy.
  5. Bracelet
    1. A large burnished gold/copper/brass metallic cuff bracelet is worn on the right wrist.
    2. The bracelet has a hole in the middle of it and with two small decorative orb shapes on each side of the hole.
    3. The bracelet has ridge designs toward the end extending in the direction of the forearm.
  6. Boots
    1. Suede or faux suede flat or low heeled boots (heels should be no higher than half an inch.)
    2. The boots should come in the following approvable colors: medium or light gray, olive green, or dark taupe. The boots should be about similar in color to the bra suede lining.
    3. The boots are cut on a diagonal angle, and are high in the back (reaching up to at least mid–calf high)
    4. The boots have burnished gold/copper/brass metallic boot tops that act as a top trim to the boots and go in the same diagonal angle. The boot tops have 4 decorative claw-like shapes in the front of the boots. The claws should be secured down onto the boots.
    5. Tailored boots only, no Ugg boots or Chunky winter boots.
    6. Adding boning to the spine of the boots is recommended to give the boots structure and to support the weight of the boot tops.
  7. Collar and Chain
    1. Burnished gold/copper/brass metallic collar with 6 curved snake-head like shapes on the front opening of the collar.
    2. The collar should have at least a minimum of 4 chain links on it.
    3. The chain links are silver (gold/copper/brass accents on the chain links are optional.) A full length chain is optional.
  8. Hair
    1. The hair is pulled back in a large loosely braided or twisted bun at the crown of the head with a long, thick braid descending from it.
    2. The braid should reach at least to the mid-back.
    3. The hair bun has two burnished gold/copper/brass metallic pieces on each side. These pieces have orb shapes in the middle with four finger-like shapes that partially cover each sides of the hair bun.
    4. The braid has a burnished gold/copper/brass metallic tooth-shaped ornamental tie at the end of the braid. There should be at least 2-3 inches of loose hair at the end of the braid.
    5. Naturally occurring hair colors only (brown hair color recommended); no bangs; if a wig or hair pieces are used, they must be high quality appear like real hair.
  9. Earrings
    1. Gold/copper/brass round earrings that have claw-like shaped pieces at the bottom ends.
    2. Medium-sized gold hoop earrings are also acceptable.
    3. Pierced or clip-on earrings are acceptable.
  10. All of the burnished, metallic pieces of the costume must have structure and not be limp
Optional Items:
  • Mid-sized or tall Unleashed vibroaxe
 

Ressources supplémentaires:

Verrouillé

Revenir à « Episode VI »